![]() ![]() ![]() The left button on the unit is the Mode button and will step thru the various display modes. The Scanmaster option for "Scanmaster G" must be turned on using the USB connection from PLC (at least version 2.6.0) before the datastream will work correctly. PowerLogger: (ensure the PowerLogger is up to date, (at least version 5.0).Stock Buick V6 Turbo: with all the variants that increase update speed and include injector pulsewidth and spark advance.The beta version supports the following data-streams: The unit will detect the incoming datastream type during power-up. The dashboard sheetmetal is will work as a good Ground. ![]() The ALD connector ground is a good quality ground connection. Ground should be grounded to a good signal ground. +12v is connected to ignition power from the fusebox, Comms connects to either the ALDL signal (orange wire) at the ALDL connector under the dash. Some gauge pods are too tight to use the bracket, in which case a small dab of RTV sealant can be used to retain the unit.Ĭonnection: The unit has 3 connections on the back, +12v, Comms, and Ground. use the included bracket installed from the reverse side to retain it. Installation: It installs like any gauge in a 2-1/16" guage holder or pod. Turbo Buick ScanmasterG Preliminary instructions. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |